All
Finisar optical GBICs support two wire serial communication protocol.
These GBIC use an Atmel AT24C01A 128 byte E2PROM (with an address
of 101000X). Not only this, but all Finisar optical GBICs incorporate
a microcontroller that monitors system parameters such as laser current,
laser temperature, and in the case of 1300mm/1550nm parts, transmitted
power. Finisar's XFP, XPAK, X2, 300-pin, SFP, SFP+, 2x6, 2x7, and
2x10 SFF and selected GBIC transceivers feature a microprocessor
and diagnostics interface that provides performance information on
the data link.
Description: Copper GBIC transceiver
comply with GBIC specification revision 5.5 . It is compatible
with the Gigabit Ethernet 1000Base-CX standard and Fibre Channel.
This module is available with DB9 connectors.
Part # FCM-8519-2-T4
Description: Copper GBIC transceivers
comply with GBIC specification revision 5.4. It is compatible with
the Gigabit Ethernet 1000Base-CX standard and Fibre Channel. This
module is available with HSSDC connectors.
Part # FCM-8520/8521-3
Description: 1 Gigabit 1000BASE-T
Copper GBIC.
Part # FCM-8521-3
Description: 1000Base-T Copper GBIC
transceivers are based on the GBIC specification revision 5.5.
It is compatible with the Gigabit Ethernet and 1000Base-T standards. The
FCM-8520-3 uses the GBIC's RX_LOS pin for link indication, and
1000Base-X auto-negotiation must be disabled on the host system.
It is compatible with 1000Base-X auto-negotiation, but
does not have a link indication feature (RX_LOS is internally grounded).
Part # FCMJ-8520-3
Description: Up to 1.25 Gb/s bi-directional
data links, Hot-pluggable SFP footprint, Extended case temperature
range: 0°C to +85°C, Fully metallic enclosure for low EMI,
Low power dissipation (1.2 W typical), Compact RJ-45 connector
assembly, Access to physical layer IC via 2-wire serial bus, 10/100/1000
BASE-T operation in host systems with SGMII interface Based on
SFP MSA.
Description: 1310nm GBIC transceivers
comply with GBIC Specification Revision 5.5 in all respects expect
where deviations are required to accommodate the higher bit rate.
It is compatible with Gigabit Ethernet as specified in IEEE 802.3,
Fiber Channel FC-PH, PH2, PH3 and FC-PI-2 Rev 10.0.
PDescription: OC-3 SR-1/STM I-1 or
OC-3 IR-1/STM S-1.1 2x10 SFF.
Part # FTLF1324P2xTy
Description:
Small Form Factor Pluggable (SFP) transceivers are compatible with
the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1.
They are compatible with Fibre Channel FC-PI-2 10.02 standard for
4km distances at 4.25 Gb/s and 10km distances at 2.125 and 1.06
Gb/s.
Description: Compatible with the
Small Form Factor Pluggable MSA. They simultaneously comply with
Gigabit Ethernet and 1x/2x Fibre Channel. Digital diagnostics functions
are available via the 2-wire serial bus.
Part # FTRJ8519U1xNL
Description: 2 Gigabit Short-Wavelength
2x6 Pin SFF with Digital Diagnostics (FTRJ8519U1xNL) SFP - SX -
850nm - MM.
Part # FTRX-1411D3
Description: 10GBBASE-LR Multirate
XFP Long Reach transceiver module.
Part # FTRX-1411M3
Description: 10GBBASE-LR Multirate
XFP Long Reach Transceiver Module.
Part # FTRX-1611-3
Description: 10GBBASE-LR Multirate
XFP Extra Long Reach transceiver module.
Part # FTRX-1811-3
Description: Multi-protocol 10Gb/s
80km XFP.
Knowledgeable & Friendly Sales Representatives
Our GGI GBICS friendly and knowledgeable Sales
Representatives can give you more information about any of our
products listed. All of our pre-owned products are of high value and
fully-tested prior to shipping. GGI GBICS is an excellent source for
all your network supplies, parts, and upgrades. Payment terms on
approved credit.
QUOTE REQUEST
Please
email us for a quote request at
sales@ggigbics.com. Our Sales Representatives are always here
for you. If you cannot see what you are looking for, drop us a line
and put us to work!
Standard One-Year Warranty
GGI GBICS provides a one-year
warranty for end-user customers. The warranty period for GGI GBICS
begins on the day of shipment. This warranty does not cover software
or key codes. For more information, go to GGI GBICS'
warranty Webpage.
Keep your annual gross profit up and trade-in your
network hardware with us. You may be amazed at how much money you
can save as you upgrade your business network. Here at GGI GBICS, we
make sure to give you a fair deal on your trade-in. To learn more,
go to GGI GBICS IT
Asset Recovery Webpage.
Just think of how much money you can
save your company! Our quest is to give you excellent deals and
provide you with a large variety of network hardware. And remember,
GGI GBICS gives excellent prices on all our network equipment -
you can save up to 50 -90% off list price!
All
Finisar optical GBICs support two wire serial communication protocol.
These GBIC use an Atmel AT24C01A 128 byte E2PROM (with an address
of 101000X). Not only this, but all Finisar optical GBICs incorporate
a microcontroller that monitors system parameters such as laser current,
laser temperature, and in the case of 1300mm/1550nm parts, transmitted
power. Finisar's XFP, XPAK, X2, 300-pin, SFP, SFP+, 2x6, 2x7, and
2x10 SFF and selected GBIC transceivers feature a microprocessor
and diagnostics interface that provides performance information on
the data link.
Please
email us for a quote request at 
